| |
About us |
|
FTM-TECHNOLOGIES
|
|
About FTM-TECHNOLOGIES
|
FTM Technologies,
manufacturer and distributor, was created by a
high level team of technicians having a long
experience of the equipment of workshops of
electronics and a more general way of industry.
Our materials and tools are used besides by
growth industries, such as nuclear industry,
aeronautics, military industry or the medical
instrumentation.
|
 |
 |
As we propose much more to our
customers as a simple validation
of order, because, we know what
we are talking about.
Tools and materials which we
refer were all tested with
severity by our care.
And we can affirm that we offer
in all the cases the best
quality report - price as
possible. We bring to our
customers a firm contract
of quality and service as well
as responsible interlocutors. |
|
We also know to adapt our
technical proposals to the
contingencies of a manufacture
and the specific needs for a
production. As of the problem
arising, thanks to our know-how,
our technicians will study
quickly the most powerful
solution.
Extremely mobile, available,
effective, innovating, we treat
the requests of our customers as
if they were ours. To follow and
even anticipate the market
trends, such is the challenge of
our trades of industry.
Technological
developments, legislative
context, economic constraints...
the whole of these requirements
engage us all, actors of
industry, to develop and
maintain a step of permanent
improvement of our services. |
 |
The RoHS directive, and
thus it "lead free" is now operational in
our manufacture.
 
From the 1st July 2006, every new product put on the market in
the European Union, whether it is imported or manufactured in the
Union, will have to be in conformity with the directive.
DIRECTIVE 2002/95/CE
OF the European Parliament AND the COUNCIL
of the 27nd January 2003
 |
|
Treatment
of the air |
|
Why treat the air? |
 |
Legislation:
–› Section II
Environments of the
places of work
Under section 1 – Ventilation, cleansing
DécDecree n°84-1093 of the 7th
December 1984 modified by decree
n°87-809 of the 1st October, 1987
«...the emissions in the form of gas,
vapors, solid
aerosols of particles or liquids, of
unhealthy substances, awkward or
dangerous for the health of the workers
must be removed...»
–› Section II Rules of hygiene
Under section 2 - Ventilation, cleansing
Decree n°84-1094 of the
7thDecember 1984
"... objective to reach by set of
priorities: 1) Suppression of the
emissions of awkward or dangerous
unhealthy substances...
2) Collecting with readiest possible of
the sources of emission...
3) Dilution and evacuation of the
residual pollutants by general
ventilation. General ventilation cannot
be allowed like principal
technique of cleansing... " |
|
How to treat the air? |
Chimical product:
The active carbon
Capacity of our
filters FCP1:
Select your product hereafter :
|
ADSORPTION
CAPACICAPACITY OF A
COAL the REGARDING OF SOME GASES
AND VAPORS . |
| Index
a |
corresponds to a very low
adsorption under the ordinary
conditions |
| Index
b |
affected with little
adsorbed substances and on the
subject which the
operating conditions must be
studied |
|
Index c |
allotted to the cases of
average adsorption. In
these cases, the industrial
facilities usually lead to
excellent results |
| Index
d |
cocorresponds to the highest
adsorption. In these cases, one
always obtains very good results |
|
The chemical collecting of the
substances is carried out using
activated carbon. The properties of
adsorption of the active carbon
filter are due to its micro porosity and
thus to its extremely large
interior surface.This fact it results
from it strong physical attractions
which
adsorb the impurities contained in the
air which crosses it. The
activated carbon adsorbs 20 to 30% of
sounds weight before its
effectiveness does not start to decrease.
|
|
Dust and fine particles:
Use of filter media:
FPP1 and FA2 for
external rejection filter until
85 % gravimetric.
FAP1 filters particle for recycling
until A 90-95 %
opacimetric.
|
|
|
 Have
a look on our range of products
 |
|
|
Our
distributors network
Our company has broad an active network
of distributors in France and is increasing his
activity in Europe thanks to its
distributors and with its exhibition on
international shows such as
PRODUCTRONICA in MUNICH.
YOU ARE DISTRIBUTOR, OUR PRODUCTS MAY INTEREST YOU,
CONTACT US!
|
MANUFACTURER/SUPPLIER/DISTRIBUTOR
For the electronic, space, military,
railway, medical industries.
FTM Technologies 78 rue Raymond Poincaré 92000 NANTERRE
FRANCE
Tél : +33 1 40 86 00 09 Fax : +33 1 40 86 16 45 Mail :
info@ftm-technologies.com
Site : www.ftm-technologies.com
Website realized by : Nicolas Cuffel
Webmaster :
cuffel.nicolas@ftm-technologies.com
|
