The statics soldering
pots&
baths are
generally used for tinning, enamel and gold
removal. Some baths can be equipped with a
manual pantograph for the serial tinning of
components, or automatic systems.
Static solder
pot PE600NAD.
Solder pot Ø60mm
Adapted for tinning, the
enamel or gold removal, equipped
with a regulator PID has a double
posting for the adjustment of
instruction.
Technical characteristics
Highest temperature
Power
Bath dimensions :
Diameter
Depth
Tin capacity
Regulation
Power supply
600°C
600 W
60 mm
60mm
1,5 Kg
PID from 0 to 600
°C set temperature point
function
Double digital display
230 V / 50 Hz
Solder
pot BE600N.
Solder pot 150 x 100 mm
Adapted
for tinning, gold-plating or enamel
removal .
Technical characteristics
Highest temperature
Power
Bath dimensions :
L x W x H
Tin capacity
Regulation
Power supply
Maintenance
600°C
1600 W
150 x 100 x 55 mm
9 Kg
PID from 0 to
600°C with set temperature point
function
Double digital display
230
V / 50 Hz
Levelling and
cleaning of the surface of the
bath by manual scraping.
Two machined surfaces are
envisaged for this purpose, a
small tray
for dross collect is located on
the right.
Highest temperature
Power
Bath dimensions :
L x W x H
Tin capacity
Regulation
Power supply
Maintenance
300°C
1600 W
300
x 50 x 50 mm
7 Kg
PID
from 0
to 300°C with set temperature point
function
Double digital display
230
V / 50 Hz
Levelling and cleaning of the
surface of the bath by manual
scraping.
Two machined surfaces are
envisaged for this purpose, a
small tray
for dross collect is located on
the right.
solder bath BE300 x 90
Solder bath 300 x 90 mm
Adapted
for the tinning or the enamel or gold
removal of parts in series, because
it can be equipped with an
automatic
tinning system.
Technical characteristics
Highest temperature
Power
Bath dimensions :
L x W x H
Tin capacity
Regulation
Power supply
Maintenance
600°C
2400 W
300
x 90 x 50 mm
9 Kg
PID
from 0
to 600°C with set temperature point
function
Double digital display
230
V / 50 Hz
Levelling and cleaning of the
surface of the bath by manual
scraping.
Two machined surfaces are
envisaged for this purpose, a
small tray
for dross collect is located on
the right.
Automatic tinning.
The TP 60P allows premium quality
results thanks to its adjustable
parameters.
Principle :
This robot allows the transport
of components during tinning,
gold and enamel removal or
fluxing operations by regulating
the following parameters:
Entry
speed
Exit
speed
Preheating time
Immersion time
Advantages :
Thanks to its very precise
parameters, it allows, for
example, to avoid bridges that
we can often find between the
components’ legs when going out
from the tin.
This programmable robot is
conform to the norm NF C 20 720
relating to brazing’s modes of
tries.
Other example of use
Allows
the tinning of components
tinned before with alloy
tin/lead to make them
conform to the RoHS norms.
Photos of the different applications of
the automatic tinning machine
Example of automatic tinning
machine mounted on a double
tinning bath
Example of automatic tinning
machine mounted on a tinning
bath 300 x 90
Example of automatic tinning
machine mounted on a tinning
bath 300 x 90
Pantograph
In case the time’s constraints
do not need to be very precise,
the pantograph is used for
tinning operations and gold or
enamel removal of serial
components.
